Craft
A tufting gun fires 30 stitches a second
The needle punches yarn through stretched cloth over and over, leaving loops behind. The design is drawn on the back — the maker never sees the front until it is cut free.
More in Craft
Molten glass is worked at 1,100°C
Glassblowers gather glass at furnace temperatures above 1,100°C, where it flows like honey. The pipe must keep spinning — stop, and gravity pulls the piece out of shape.
Damascus patterns come from folded layers
Pattern-welded steel is made by forge-welding layers together and folding them again and again. Etching in acid reveals the layers as flowing bands across the blade.
A katana curves itself in the quench
Smiths coat the blade's spine in thick clay so it cools slower than the edge. The edge hardens, contracts differently, and the blade bends into its curve in seconds.
Neon signs glow because of trapped gas
Bent glass tubes are filled with low-pressure noble gas. Electricity excites the atoms and they release light — pure neon glows red-orange; other colours use argon and coatings.
Curing epoxy gets hot enough to crack
Epoxy hardens through an exothermic reaction that makes its own heat. Pour it too thick and the slab can bubble, yellow, or crack itself apart from the inside.
Centring clay is the hardest part
Before shaping anything, the potter forces the lump into perfect rotational balance. A few millimetres off-centre and the walls thin unevenly and collapse.